Engine and peripherals
Oil consumption
In this manual: Engine and peripherals
~1min read
OIL CONSUMPTION MEASUREMENT PROCEDURE
1 - Top up to maximum level
Note: This operation must be carried out with the engine warm, after the cooling fan unit has cycled.- Stop the engine.
- Wait two minutes for the oil to drain completely into the lower sump.
- Carry out a visual check on the dipstick.
- Top up to the "MAX" mark.
- Make a paint mark on both the filler cap and the sump drain plug so you can later check that they have not been removed.
2 - Customer driving
- Ask the customer to drive approximately 2000 km, without reaching the "MINI" oil level mark.
3 - Topping up
Note: This operation must be carried out with the engine warm, after the cooling fan unit has cycled.- Stop the engine.
- Wait two minutes for all the oil to drain into the sump.
- Carry out a visual check on the dipstick.
- Top up to the "MAX" mark.
- Note the quantity of oil added and the mileage driven since the last top-up.
4 - Measuring oil consumption
- Oil consumption = Quantity of top-up oil (in litres) / number of kilometres (in thousands).
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?