Multi-function bracket

REMOVAL

• Position the vehicle on a two-post lift.
• Disconnect the battery (see Electrical Equipment chapter).
• Remove the alternator (see Starting - Charging chapter).
• Disconnect:

• the air conditioning compressor connector,
• the pressure switch connector.

• Remove the air conditioning compressor mountings.
• Secure the air conditioning compressor to the radiator crossmember.

Example for K4M, K4J, K9K engines

• Remove:

• the multi-function bracket mountings (1),
• the multi-function bracket.

INSTALLATION

• Refit the multi-function bracket.

K4J or K4M or K9K

• Tighten to the following torques:

• the multi-function bracket mounting bolts (4.4 daN.m),
• the multi-function bracket mounting bolt on the sump (2.1 daN.m),
• the air conditioning compressor mounting bolts (2.5 daN.m).

F4R or F9Q

• Tighten to the following torques:

• the multi-function bracket mounting bolts (4.4 daN.m),
• the air conditioning compressor mounting bolts (2.5 daN.m).

• Refit the alternator (see Starting - Charging chapter).
• Refit in the reverse order of removal.

Connect the battery; carry out the necessary re-learns (see Electrical Equipment chapter).