Middle pillar inner panel

This part may be partially replaced following cuts (a), (b) and (c): operation complementary to pillar reinforcement replacement for a side collision.

IMPORTANT

The cut positions given in the procedures cannot be offset; they are determined by those of the inner panels and reinforcements.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied assembled with airbag mounting brackets

Note: Middle pillar inner panel 1.5

PART TO BE REPLACED IN POSITION

Cut detail (a)

WARNING

Unclipping the upper quarter window frame reinforcement is required to carry out the operation.

Cut detail (b)

WARNING

Unclipping the central quarter window frame reinforcement is required to carry out the operation.

Cut detail (c)