Rear side door panel
Replacing this part is a basic operation for a side collision.
Information on additional or trim parts is given in their respective chapters.
REPLACEMENT PART CONTENTS
Part supplied assembled with:
Belt reinforcement
Sound-insulating plates

PARTS CONCERNED (thickness in mm):
- Door panel 0.7
- Upper reinforcement 1


NOTE: The door panel can be removed using the specific panel removal tool, part number Car. 1657.


NOTE: Structural adhesive must be used on the perimeter (crimped area).
For areas (1), use a setting adhesive type M.J. Pro (reference: 77 11 172 376).


Use adhesive type M.J. Pro (reference: 77 11 172 376) to ensure appearance and sealing after the panel is crimped.

CAUTION: Make sure the panel soundproofing is present.
If straightening the panel requires removing, even partially, one or more soundproofing pads, they must be systematically replaced.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.