Front side door panel

Replacing this part is a basic operation for a side collision.

Information on additional or trim parts is given in their respective chapters.

REPLACEMENT PART CONTENTS

Supplied assembled with:
Upper reinforcement
Soundproofing plates

Version B

Version C

PARTS CONCERNED (thickness in mm):

1. 1
   Door panel 0.7
2. 2
   Seat belt reinforcement 1

Version B

Version C

NOTE: The door panel can be removed using the specific crimp-release pliers, reference Car. 1657.

Version B

Version C

NOTE: Structural adhesive must be used on the perimeter (crimped area).

For areas (1), use a setting adhesive type M.J. Pro (reference: 77 11 172 376).

Version B

Version C

Use adhesive type M.J. Pro (reference: 77 11 172 376) to ensure appearance and sealing after the panel is crimped.

Version B

Version C

CAUTION: Make sure the panel soundproofing is present.

If straightening the panel requires removing, even partially, one or more soundproofing pads, they must be systematically replaced.