Bodywork
Fuel filler flap
In this manual: Bodywork
~1min read
Replacing this part is a basic operation for a rear side collision.
This is a removable plastic component.
REPAIR
The flap is made of NORYL GTX; for the paint range, refer to Technical Note 473A.
REPLACEMENT PART CONTENTS
Part supplied alone (pre-primed).

REMOVAL
Apply light finger pressure to disengage the flap from the four clips (A) and pull the flap outwards.
INSTALLATION
Refit in the reverse order of removal.

NOTE: No adjustment is possible when refitting the fuel filler flap; the screws (B) are only used to remove the fuel filler neck.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?