Blind Spot Detection Indicator Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the mirror (A).

   

Installation

1. 1
   Install the outside mirror.
2. 2
   Connect the negative (-) battery terminal.

Inspection

1. 1
   The body wire harness system can quickly check faulty parts using the vehicle scan tool (GDS). The GDS provides the following information.

   1. Self-test: Diagnostic trouble code (DTC) check and display
   2. Data list: Check the status of system inputs/outputs.
   3. Forced operation: Check the operating status of the system
   4. Additional Functions: Other Controls such as System Option and Zero Point
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   After selecting BCM, select the module to check.

   Select "Blind-Spot Detection (BSD)" to check the BSD warning indicator.

4. 4
   Select the "Input/Output Monitor" menu to check the current status of the input/output data. The input/output data for the sensors related to the BSD warning indicator can be checked.

   

5. 5
   To check the BSD warning LED or forcibly switch it, select "Actuation Test".

   

6. 6
   To check the blind-spot detection (BSD) system diagnostic trouble codes, select "Diagnostic Trouble Codes".