Description and Operation

Safety Power Window Function

1. 1
   Safety function condition: When a force of 100 N (using a 10 N/mm spring) is detected while the window is closing, the window reverses.
2. 2
   Window reverse distance (except when holding the auto-up switch)

   A.	When a pinch is detected 4–250 mm from the top of the door, the window reverses to 300 mm from the top of the door.

   B.	When a pinch is detected more than 250 mm from the top of the door, the window reverses to 50 mm from the pinch position.

3. 3
   Window reverse distance (holding the auto-up switch)

   A.	When a pinch is detected while holding the auto-up switch, the window reverses to 25 mm from the pinch position.

   B.	Auto-up function is not available for 5 seconds after the above condition. > When the auto-up switch is held, the window operates as manual up. (Safety function is not activated.)

   C.	5 seconds after the above condition, when the auto-up switch is held, the window reverses to 25 mm from the pinch position.

4. 4
   Safety function not available. The safety function is not available within 4 mm from the top of the door.
5. 5
   Battery Connection Initialization: When battery power has been disconnected for more than 5 minutes, the power window switch must be initialized.

   1. Window Operation Before Initialization

      A.	Manual up/down function is available.

      B.	Auto-up function is not available. (When the auto-up/down switch is held, the window operates as manual up/down.)

   2. Initialization Method
      Close the window from the fully open position and hold the switch in the fully closed position for more than 0.2 seconds. (If closing is started from the fully closed window position, initialization may fail.)
   3. When initializing the safety power window in the lock condition, the following conditions may occur.

      A.	Safety Function Not Available

6. 6
   Fail-Safe Mode Initialization

   1. If the window is forcibly moved and the motor is faulty, the window switch may enter fail-safe mode for user safety.
   2. Power Window Operation in Fail-Safe Mode

      A.	Auto/Manual-Down function is available.

      B.	Auto/Manual-Up function is not available. (During auto/manual up, the window rises 20 mm and stops moving.)