Rear Pillar Trim Repair Procedures

Replacement

Wear gloves to protect your hands.

When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage. Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Slightly remove the rear door body side weatherstrip.
2. 2
   Using a flat-tip screwdriver or trim removal tool, remove the rear pillar trim (A).

   Forcing the rear pillar garnish off may damage the body panel and the rear pillar trim.

   

3. 3
   Install in the reverse order of removal.

   Replace any damaged clips.