Body (Interior and Exterior)

Trunk Lid Rear Panel Repair Procedures

4steps
~24min
2/5difficulty
Done 0 of 4

Replacement

  • Wear gloves to protect your hands.
  • When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage.
  • Be careful not to scratch the body surface.
  1. Remove the trunk lid trim. (Refer to Trunk Lid - "Trunk Lid Trim")
  2. Remove the inside rear combination lamp. (Refer to Body Electrical System - "Rear Combination Lamp")
  3. Loosen the mounting nut, then remove the trunk lid rear panel (A).
  4. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.