Air valve removal and installation

1. 1
   Remove the wheel assembly. Refer to “front wheel assembly removal and installation” and “rear wheel assembly removal and installation” .
2. 2
   Remove the tire. Refer to “tire removal and installation” .
3. 3
   Remove the air valve (1) from the wheel.

   

Install the air valve in the reverse order of removal. Pay attention to the following points:

• any dust or rust around the valve hole (1) must be cleaned off

• Install the air valve (2) in the wheel (3).

• be careful not to damage the valve lip (4) of the valve.
• Replace the air valve with a new one.

to properly install the valve into the valve hole, apply a special tire lubricant or neutral soapy liquid to the valve.

Valve Wheel Valve lip