Front wheel dust seal / bearing removal and installation

1. 1
   Remove the front wheel assembly. Refer to “front wheel assembly removal and installation” .
2. 2
   Remove the dust seals using the special tool.

   Special tool

(a): 09913–50121 (oil
seal remover)

3. Remove the wheel bearings using the special tool.

Special tool (b): 09921–20240 (bearing remover
set)

4. Remove the spacer (1).

Caution the removed dust seals and bearings must be replaced with new ones.

1. Apply grease to the wheel bearings.

: Grease 99000–25010 (suzuki
super grease “a” or equivalent)

2. First install the right wheel bearing, then install the spacer (1) and left wheel bearing with the special tool.

Caution the sealed cover of the bearing must face outside.

Spacer Clearance

3. Install the dust seals with the special tool.

4. Apply grease to the lip of dust seals.

: Grease 99000–25010 (suzuki
super grease “a” or equivalent)

5. Install the front wheel assembly. Refer to“front wheel assembly removal and installation” .