Crankcase breather (pcv) hose / reed valve / cover removal and installation

1. 1
   Lift and support the fuel tank with the prop stay.

   Refer to “fuel tank removal and installation” in section 1g .

2. 2
   Remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
3. 3
   Disconnect the crankcase breather (pcv) hose (1).

   

4. Remove the crankcase breather (pcv) cover (2).

Installation is in the reverse order of removal.

Pay attention to the following points:

1. apply bond to the hatching part of crankcase breather (pcv) cover.

: Sealant 99000–31140 (suzuki
bond no.1207B or equivalent)

• Fit the clamp to the bolt “a”.

• Connect the crankcase breather (pcv) hose securely.

  Refer to “throttle body construction” in section 1d .