Pair control solenoid valve removal and installation

1. 1
   Lift and support the fuel tank with the prop stay.

   Refer to “fuel tank removal and installation” in section 1g .

2. 2
   Remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
3. 3
   Remove the pair control solenoid valve (1) along with the pair reed valve covers (2).

   

4. Disconnect the pair control solenoid valve coupler (3).

5. Disconnect the pair hoses (4).

Installation install the pair control solenoid valve in the reverse order of removal. Pay attention to the following point:

• connect the pair hoses properly. Refer to “pair system hose routing diagram” .