Pair reed valve removal and installation

1. 1
   Lift and support the fuel tank with the prop stay.

   Refer to “fuel tank removal and installation” in section 1g .

2. 2
   Remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
3. 3
   Remove the pair control solenoid valve (1) along with the pair reed valve covers (2). Refer to “pair control solenoid valve removal and installation” .

   

4. Remove the pair reed valves (3).

Install the pair reed valve in the reverse order of removal. Pay attention to the following points:

• apply thread lock to the pair reed valve cover bolts and tighten them to the specified torque.

: Thread lock cement
99000–32110 (thread lock cement super “1322” or equivalent)