Ignition system check

1. Remove the spark plugs and reattach them to the spark plug caps.

1. 1
   Put the engine stop switch in the "" position and ignition
   switch in the "on" position.

   While holding a spark plug with its base firmly against the engine, push the electric starter button. If the ignition system is operating properly, a blue spark should jump across the spark plug gap.

2. 2
   If there is no spark, clean the spark plug. Replace it if necessary.

   Retry the above procedure with the cleaned spark plug or new one.

3. 3
   If there is still no spark, take your machine to your authorized suzuki dealer.

Warning
Performing the spark test improperly can cause a high voltage electrical shock or an explosion. Avoid performing this check if you are not familiar with this procedure, or if you have a heart condition or wear a pacemaker.

Keep the spark plug away from the spark plug hole during this test.

Complaint

: engine stalls

1. 1
   Make sure there is enough fuel in the fuel tank.
2. 2
   If the fuel injection indicator displays "fi", showing signs of trouble in the fuel injection system, take your machine to an authorized suzuki dealer.

   Refer to the "instrument panel:' section for fuel injection system indicator explanation.

3. 3
   Check the ignition system for intermittent spark.
4. 4
   Check the idle speed. If necessary, adjust it using a tachometer.

   The correct idle speed is 1050- 1250 r/min.