Toyota 4Runner Quiz
Brake

Crawl Switch

In this manual: Brake
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE DRIVE MONITOR SWITCH (CRAWL CONTROL SWITCH AND MULTI-TERRAIN SELECT SWITCH)

(a) Detach the 4 claws and remove the drive monitor switch (CRAWL control switch and multi-terrain select switch) from the map light assembly.

(b) Disconnect the connector.

Installation INSTALLATION PROCEDURE

1. INSTALL DRIVE MONITOR SWITCH (CRAWL CONTROL SWITCH AND MULTI-TERRAIN SELECT SWITCH)

(a) Connect the connector.

(b) Attach the 4 claws to install the drive monitor switch (CRAWL control switch and multi-terrain select switch).

2. PERFORM CRAWL CONTROL CALIBRATION

(a) Perform crawl control calibration (See page ).

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.