Toyota 4Runner Quiz
Brake

Vsc Off Switch

In this manual: Brake
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE DRIVE MONITOR SWITCH


2. REMOVE MAP LIGHT ASSEMBLY


3. REMOVE VSC OFF SWITCH

(a) Disconnect the 2 connectors.

(b) Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the map light assembly.

HINT:

Tape the screwdriver tip before use.
Inspection INSPECTION PROCEDURE

1. INSPECT VSC OFF SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

3 (E) - 6 (OFF)

Pressed

Below 1 Ω

Not pressed

10 kΩ or higher
Text in Illustration

*a

Component without harness connected

(VSC OFF Switch)

If the value is not as specified, replace the VSC OFF switch.
Installation INSTALLATION PROCEDURE

1. INSTALL VSC OFF SWITCH

(a) Attach the 2 claws to install the VSC OFF switch to the map light assembly.

(b) Connect the 2 connectors.

2. INSTALL MAP LIGHT ASSEMBLY


3. INSTALL DRIVE MONITOR SWITCH

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.