Disassembly

1. REMOVE NO. 3 FLOOR WIRE

(a) Disconnect the 4 connectors and remove the 3 pieces of tape.

(b) Detach the 4 clamps to remove the No. 3 floor wire.

2. REMOVE REAR BUMPER SIDE BRACKET LH

(a) Remove the clip and 2 screws.

(b) Detach the guide to remove the rear bumper side bracket LH.

3. REMOVE REAR BUMPER SIDE BRACKET RH

HINT:

Use the same procedure as for the LH side.

4. REMOVE REAR BUMPER PLATE LH

(a) Remove the 2 outside moulding retainers.

(b) Detach the claw to remove the rear bumper plate LH.

5. REMOVE REAR BUMPER PLATE RH

(a) Remove the outside moulding retainer.

(b) Detach the claw to remove the rear bumper plate RH.

6. REMOVE NO. 1 REAR BUMPER PLATE

(a) Remove the outside moulding retainer.

(b) Detach the claw to remove the No. 1 rear bumper plate.

7. REMOVE REAR BUMPER CENTER MOULDING

(a) Remove the 6 outside moulding retainers.

(b) Detach the 4 claws to remove the rear bumper center moulding.

8. REMOVE NO. 1 ULTRASONIC SENSOR

9. REMOVE ULTRASONIC SENSOR CLIP

10. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

11. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER