Vehicle Interior
Door Courtesy Light(for Front Door)
In this manual: Vehicle Interior
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL CAUTION / NOTICE / HINT.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
Removal REMOVAL CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
.gif)
2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
.gif)
3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
.gif)
4. REMOVE FRONT DOOR GLASS WEATHERSTRIP INNER LH
.gif)
5. REMOVE COURTESY LIGHT ASSEMBLY
(a) Detach the 2 claws and remove the light. |
![]() |
(b) Disconnect the connector.
(c) Remove the bulb.
Installation INSTALLATION CAUTION / NOTICE / HINTHINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. INSTALL COURTESY LIGHT ASSEMBLY
(a) Install the bulb.
(b) Connect the connector.
(c) Attach the 2 claws to install the light.
2. INSTALL FRONT DOOR GLASS WEATHERSTRIP INNER LH
.gif)
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
.gif)
4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
.gif)
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
.gif)
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
