Toyota 4Runner Quiz
Vehicle Exterior

High Mounted Stop Light Assembly

In this manual: Vehicle Exterior
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE CENTER STOP LIGHT ASSEMBLY

(a) Remove the 2 screws and stop light.

(b) Disconnect the connector.

Inspection INSPECTION PROCEDURE

1. INSPECT CENTER STOP LIGHT ASSEMBLY

(a) Apply battery voltage to the connector and check the LED illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 2 (STP)

Battery negative (-) → Terminal 1 (E)

LED illuminates

If the result is not as specified, replace the center stop light assembly.

Text in Illustration

*a

Component without harness connected

(Center Stop Light Assembly)
Installation INSTALLATION PROCEDURE

1. INSTALL CENTER STOP LIGHT ASSEMBLY

(a) Connect the connector.

(b) Install the stop light with the 2 screws.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.