Vehicle Exterior
Relay
In this manual: Vehicle Exterior
~1min read
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE
1. REMOVE HEADLIGHT RELAY
(a) Remove the headlight relay from the engine room relay box. |
![]() |
2. INSPECT HEADLIGHT RELAY
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the headlight relay. |
![]() |
3. INSTALL HEADLIGHT RELAY
(a) Install the headlight relay to the engine room relay box.
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

