Removal

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

1. REMOVE FRONT FENDER MUDGUARD LH (w/o Intuitive Parking Assist System)

2. REMOVE FRONT FENDER MUDGUARD LH (w/ Intuitive Parking Assist System)

3. REMOVE ROCKER PANEL MOULDING COVER LH (w/o Intuitive Parking Assist System)

(a) Remove the screw.

(b) Detach the 2 clips to remove the rocker panel moulding cover LH.

4. REMOVE ROCKER PANEL MOULDING LH (w/ Intuitive Parking Assist System)

5. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

(a) Put protective tape around the front fender moulding sub-assembly LH. Text in Illustration *1 Protective Tape

(b) Remove the grommet.

(c) w/ Intuitive Parking Assist System:

(1) Remove the clip.

(d) Remove the 6 screws.

(e) Using a moulding remover, detach the 9 clips to remove the front fender moulding sub-assembly LH.

(f) Remove the 9 clips.

6. REMOVE REAR DOOR OUTSIDE MOULDING LH (w/o Intuitive Parking Assist System)

(a) Put protective tape around the rear door outside moulding LH. Text in Illustration *1 Protective Tape

(b) Using a moulding remover, detach the 7 clips and 2 claws to remove the rear door outside moulding LH.

(c) Remove the 7 clips.

7. REMOVE REAR DOOR OUTSIDE MOULDING LH (w/ Intuitive Parking Assist System)

(a) Put protective tape around the rear door outside moulding LH. Text in Illustration *1 Protective Tape

(b) Using a moulding remover, detach the 7 clips and 2 claws to remove the rear door outside moulding LH.

(c) Remove the 7 clips.

8. REMOVE NO. 3 OUTSIDE MOULDING RETAINER

(a) Remove the screw.

(b) Detach the claw to remove the No. 3 outside moulding retainer.

9. REMOVE REAR QUARTER OUTSIDE MOULDING LH

(a) Put protective tape around the rear quarter outside moulding LH. Text in Illustration *1 Protective Tape

(b) Remove the 2 screws.

(c) Using a moulding remover, detach the 4 clips to remove the rear quarter outside moulding LH.

(d) Remove the 4 clips.