Brake Vacuum Hose(for Gasoline Model)
Components
COMPONENTS
ILLUSTRATION
*1 |
FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY |
- |
- |
![]() |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
ILLUSTRATION
*1 |
UNION TO CHECK VALVE HOSE |
*2 |
CLIP |
ILLUSTRATION
*1 |
AIR TUBE |
*2 |
CLIP |
*3 |
AIR DELIVERY WAY |
*4 |
VACUUM TRANSMITTING HOSE ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL AIR TUBE
(a) Engage the clamp to install the air delivery way to the intake air surge tank assembly. |
![]() |
(b) Install the 2 clips to the air tube.
(c) Connect the air tube to the air delivery way, and slide the clip to secure it. NOTICE:
|
|
(d) Connect the air tube to the vacuum pump assembly, and slide the clip to secure it. NOTICE:
|
|
(e) Connect the 2 vacuum transmitting hose assemblies to the air delivery way. |
![]() |
2. INSTALL UNION TO CHECK VALVE HOSE
(a) Install the 2 clips to the union to check valve hose.
(b) Connect the union to check valve hose to the air delivery way, and slide the clip to secure it. NOTICE:
|
|
(c) Connect the union to check valve hose to the brake booster assembly, and slide the clip to secure it. NOTICE:
|
|
(d) Engage the clamp to install the union to check valve hose to the air tube. |
![]() |
3. INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY
Click here ![]()
4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Click here ![]()
2. REMOVE FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY
Click here ![]()
3. REMOVE UNION TO CHECK VALVE HOSE
(a) Disengage the clamp to separate the union to check valve hose from the air tube. |
![]() |
(b) Slide the clip and disconnect the union to check valve hose from the brake booster assembly. |
![]() |
(c) Slide the clip and disconnect the union to check valve hose from the air delivery way. |
![]() |
(d) Remove the 2 clips from the union to check valve hose.
4. REMOVE AIR TUBE
(a) Disconnect the 2 vacuum transmitting hose assemblies from the air delivery way. |
![]() |
(b) Slide the clip and disconnect the air tube from the vacuum pump assembly. |
![]() |
(c) Slide the clip and disconnect the air tube from the air delivery way. |
![]() |
(d) Remove the 2 clips from the air tube.
(e) Disengage the clamp to remove the air delivery way from the intake air surge tank assembly. |
![]() |















