Steering
Multiplex Tilt And Telescopic Ecu
In this manual: Steering
~1min read
Components
COMPONENTS
ILLUSTRATION
*1 |
LOWER STEERING COLUMN COVER |
*2 |
MULTIPLEX TILT AND TELESCOPIC ECU |
Installation
INSTALLATION
PROCEDURE
1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a) Engage the 2 claws to install the multiplex tilt and telescopic ECU.
![]() |
Install in this direction |
(b) Connect the connector.
2. INSTALL LOWER STEERING COLUMN COVER
Click here ![]()
3. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS
Click here ![]()
2. REMOVE LOWER STEERING COLUMN COVER
Click here ![]()
3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the connector.
*a |
Protective Tape |
![]() |
Remove in this direction |
(b) Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the multiplex tilt and telescopic ECU.
Was this page helpful?

