Steering Heater Switch
Components
COMPONENTS
ILLUSTRATION
*1 |
COWL SIDE TRIM SUB-ASSEMBLY LH |
*2 |
FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
*3 |
FRONT DOOR SCUFF PLATE LH |
*4 |
HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
*5 |
INSTRUMENT SIDE PANEL LH |
*6 |
NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY |
*7 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
*8 |
STEERING HEATER SWITCH |
Inspection
INSPECTION
PROCEDURE
1. INSPECT STEERING HEATER SWITCH
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the steering heater switch. |
|
(b) Indicator Inspection
(1) Apply battery voltage to the steering heater switch and check that the indicator illuminates.
OK:
Condition | Specified Condition |
|---|---|
Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 4 (E) |
Illuminates |
Installation
INSTALLATION
PROCEDURE
1. INSTALL STEERING HEATER SWITCH
(a) Engage the 2 claws to install the steering heater switch.
![]() |
Install in this direction |
2. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
Click here ![]()
3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here ![]()
4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here ![]()
5. INSTALL INSTRUMENT SIDE PANEL LH
Click here ![]()
6. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
Click here ![]()
8. INSTALL FRONT DOOR SCUFF PLATE LH
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH
Click here ![]()
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
Click here ![]()
3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Disconnect the front door opening trim weatherstrip LH to the extent that allows the removal of the instrument side panel LH.
4. REMOVE INSTRUMENT SIDE PANEL LH
Click here ![]()
5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here ![]()
6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here ![]()
7. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
Click here ![]()
8. REMOVE STEERING HEATER SWITCH
(a) Disengage the 2 claws to remove the steering heater switch.
![]() |
Remove in this direction |


