Using the "SETUP" menu ("Bluetooth*" menu)

Registering a Bluetooth® device with the system allows the system to operate. For registered devices, the following functions are available:

Registering a portable player

Select "Pairing" with the "MENU" knob, then perform the portable player registration procedure.

Listing registered mobile phones

Select "List phone" using the "MENU" knob.

The list of registered mobile phones will be displayed.

• Connecting a registered mobile phone to the audio system

1. 1
   Select the name of the mobile phone to connect using the "MENU" knob.
2. 2
   Select "Select" by pressing the knob.

• Deleting a registered mobile phone

1. 1
   Select the name of the mobile phone to delete using the "MENU" knob.
2. 2
   Select "Delete" by pressing the knob.
3. 3
   Press(Yes).

• Disconnecting a registered mobile phone from the audio system

1. 1
   Select the name of the mobile phone to disconnect using the "MENU" knob.
2. 2
   Select "Disconnect" by pressing the knob.
3. 3
   Press(Yes).

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Listing registered portable players

Select "List audio" using the "MENU" knob. The list of registered portable players will be displayed.

• Connecting a registered portable player to the audio system

1. 1
   Select the name of the portable player to connect using the "MENU" knob.
2. 2
   Select "Select" by pressing the knob.

• Deleting a registered portable player

1. 1
   Select the name of the portable player to delete using the "MENU" knob.
2. 2
   Select "Delete" by pressing the knob.
3. 3
   Press(Yes).

• Disconnecting a Registered Portable Player from the Audio System

1. 1
   Use the "MENU" knob to select the name of the portable player to disconnect.
2. 2
   Select "Disconnect" by pressing the knob.
3. 3
   Press(Yes).

• Selecting the Connection Method

1. 1
   Use the "MENU" knob to select the name of the desired portable player.
2. 2
   Use the knob to select "Connection method".
3. 3
   Use the knob to select "From vehicle" or "From audio".

Changing the Passkey

1. 1
   Use the "MENU" knob to select "Passkey".
2. 2
   Use the knob to select a passkey consisting of 4 to 8 digits.

Enter the code one digit at a time.

Once the entire number to be registered as the passkey has been entered, press(Enter).

If the passkey to be registered has 8 digits, it is not necessary to press(Enter).

Set automatic device connection to On or Off

If "BT power" is turned on, the registered device will connect automatically when the ignition switch is turned to "ACC" (vehicles without smart entry & start system) or set to ACCESSORY mode (vehicles with smart entry & start system).

1. 1
   Use the "MENU" knob to select "BT power".
2. 2
   Press the knob to select "On" or "Off".

Displaying the Device Status

Use the "MENU" knob to select "Bluetooth* info".

• Displaying the Device Name: Use the "MENU" knob to select "Device name".
• Displaying the Device Address: Use the "MENU" knob to select "Device address".

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Set the automatic connection confirmation screen to On or Off

If "Display setting" is turned on, the connection status of the portable player will be displayed when the ignition switch is turned to "ACC" or "ON" (vehicles without smart entry & start system) or set to ACCESSORY or IGNITION ON mode (vehicles with smart entry & start system).

1. 1
   Use the "MENU" knob to select "Display setting".
2. 2
   Press the knob to select "On" or "Off".

Initialization

Use the "MENU" knob to select "Reset".

• Initializing All Settings: Use the "MENU" knob to select "Reset all", then press(Yes).
• Initializing the Audio Settings: Use the "MENU" knob to select "Sound settings", then press(Yes).

For more information on the audio settings:

Initializing the Device Information: Use the "MENU" knob to select "Car device info", then press(Yes).

The automatic connection of a portable device, the automatic display of the connection confirmation, and the passkey will be initialized.