ECU Terminals
ECU TERMINALS
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSY (with power folding mirror)
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assy.
Click here
![]()
(b) Reconnect the connectors to the instrument panel junction block assy.
(c) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values at the wire harness side with the connector disconnected.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
Ignition power supply (ACC signal) |
Ignition Switch in ACC position |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
Ignition power supply (ACC signal) |
Ignition Switch in OFF position |
Below 1 V |
MB-32 (IG) - Body ground |
- |
Ignition power supply (IG signal) |
Ignition Switch in ON position |
11 à 14 V |
MB-32 (IG) - Body ground |
- |
Ignition power supply (IG signal) |
Ignition Switch in OFF position |
Below 1 V |
(d) Reinstall the main body ECU (multiplex network body ECU) onto the instrument panel junction block assy.
Click here
![]()
(e) Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F16-14 (RET) - Body ground |
B - Body ground |
Power folding mirror motor drive voltage |
Mirror fold switch of outer mirror switch assy in folded position. |
Below 1 V |
Mirror fold switch of outer mirror switch assy in driving position. |
11 à 14 V |
|||
F16-15 (RTR) - Body ground |
P - Body ground |
Power folding mirror motor drive voltage |
Mirror fold switch of outer mirror auto switch assy in folded position. |
Below 1 V |
Mirror fold switch of outer mirror switch assy in driving position. |
11 à 14 V |
|||
F16-19 (RETR) - Body ground |
L - Body ground |
Power folding mirror motor drive voltage |
Outer mirror assy moves to folded position. |
Below 1 V |
Outer mirror assy does not move. |
11 à 14 V |
|||
F16-20 (RTRR) - Body ground |
R - Body ground |
Power folding mirror motor drive voltage |
Outer mirror assy moves to driving position. |
Below 1 V |
Outer mirror assy does not move. |
11 à 14 V |
CHECK AIR CONDITIONING AMPLIFIER ASSY
Click here
![]()
CHECK AIR CONDITIONING CONTROL ASSY
Click here
![]()