Mirrors (Outer)

Data List / Active Test

~3min read

DATA LIST / ACTIVE TEST

DATA LIST

HINT:

The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menus: Body Electrical / Main Body / Data List.

(e) Read the Data List by following the instructions on the Techstream.

Body Electrical > Main Body > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

Outer Mirror Fold SW

Power folding outer mirror switch signal*

OFF or ON

OFF: Mirror fold switch not in folded position

ON: Mirror fold switch in folded position

-

Auto Mirror SW

Power folding outer mirror switch signal*

OFF or ON

OFF: Mirror switch not in AUTO position

ON: Mirror switch in AUTO position

-

  • *: with Power Folding Mirror

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Air Conditioner or Main Body / Active Test.

(e) Perform the Active Test by following the Techstream instructions.

Body Electrical > Air Conditioner > Active Test

Tester display

Item

Control Range

Diagnostic Note

Defogger Relay (Rear)

Heated mirror operation

OFF or ON

-

(f) Perform the Active Test by following the instructions on the Techstream.

Body Electrical > Main Body > Active Test

Tester display

Item

Control Range

Diagnostic Note

Mirror Fold

Power folding mirror operation*

OFF or ON

-

Mirror Return

Power folding mirror operation*

OFF or ON

-

  • *: with Power Folding Mirror