Mirrors (Outer)

How to Use Troubleshooting

~2min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow the procedure below to troubleshoot the power mirror control system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

HINT:

  • When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
  • Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
  • The following 5 elements are essential for analyzing the problem:

    What

    Vehicle model, system name

    When

    Date, time, frequency of occurrence

    Where

    Road conditions

    What were the conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem Symptoms

NEXT
  1. PRELIMINARY CHECKS

(a) Measure the battery voltage with the ignition switch OFF.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.

NEXT
  1. CHECK LIN COMMUNICATION SYSTEM COMMUNICATION FUNCTION*

(a) Using the Techstream, check for DTCs related to the LIN communication system.

Click here

Result:

Result

Proceed to

LIN system DTCs are not output

A

LIN-related DTCs are output

B

B

GO TO LIN COMMUNICATION SYSTEM

A
  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Refer to the Symptom Troubleshooting Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Problem Symptoms Table

A

The malfunction is listed in the Problem Symptoms Table

B

B

GO TO STEP 7

A
  1. GENERAL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) ECU Terminals

Click here

(c) Data List/Active Test

Click here

(d) Check

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END