ECU Terminals
ECU TERMINALS
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
*A |
Main Body ECU (Multiplex Network Body ECU) with 2 connectors |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
2 connectors |
- |
- |
*A |
Main Body ECU (Multiplex Network Body ECU) with 1 connector |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
1 connector |
- |
- |
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assy.
Click here
![]()
(b) Reconnect the connectors to the instrument panel junction block assy.
(c) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values at the wire harness side with the connector disconnected.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition Switch in ACC position |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition Switch in OFF position |
Below 1 V |
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition Switch in ON position |
11 à 14 V |
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition Switch in OFF position |
Below 1 V |
(d) Reinstall the main body ECU (multiplex network body ECU) onto the instrument panel junction block assy.
Click here
![]()
(e) Measure the voltage and check the pulses according to the value(s) in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F15-6 (FLCY) - Body ground |
R - Body ground |
Front door (left) courtesy light switch input voltage |
Front left door open |
Below 1 V |
F15-6 (FLCY) - Body ground |
R - Body ground |
Front door (left) courtesy light switch input voltage |
Front left door closed |
Pulse generation |
3A-41 (KSW) - Body Ground |
V - Body ground |
Key Unlock Warning Switch Input |
No key in ignition key cylinder |
Pulse generation |
3A-41 (KSW) - Body Ground |
V - Body ground |
Key Unlock Warning Switch Input |
Key in ignition key cylinder |
Below 1 V |