How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Follow the procedure below to troubleshoot the key reminder warning system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS SHEET
HINT:
- When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
- Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
- The following 5 elements are essential for analyzing the problem:
What
Vehicle model, system name
When
Date, time, frequency of occurrence, whether the problem appeared recently or has been occurring for a long time
Where
If the problem occurs at a specific location
What were the conditions?
Doors locked or unlocked, ignition switch ON, engine started.
How did it happen?
Problem Symptoms
|
PRELIMINARY CHECKS
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.
|
CHECK CAN COMMUNICATION SYSTEM FUNCTION*
(a) Using the Techstream, check for DTCs related to the CAN communication system.
Click here
![]()
Result:
Result | Proceed to |
|---|---|
No CAN system DTCs are output |
A |
CAN-related DTCs are output |
B |
| B | GO TO CAN COMMUNICATION SYSTEM |
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Problem Symptoms Table |
A |
The malfunction is listed in the Problem Symptoms Table |
B |
| B | GO TO STEP 7 |
|
GENERAL ANALYSIS AND TROUBLESHOOTING*
(a) ECU terminals
Click here![]()
(b) Data List/Active Test
Click here![]()
(c) Operation Check
Click here![]()
(d) Check
Click here![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |