Doors / Back Door

Rear Door Opening Trim Weatherstrip

~2min read

Components

COMPONENTS

ILLUSTRATION

*A

without Rear Seat Side Airbag

*B

with Rear Seat Side Airbag

*1

REAR DOOR OPENING TRIM WEATHERSTRIP

*2

REAR DOOR SILL PLATE

Removal

REMOVAL

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

Click here

2. REMOVE REAR DOOR SILL PLATE (w/o Rear Seat Side Airbag)

Click here

3. REMOVE REAR DOOR SILL PLATE (w/ Rear Seat Side Airbag)

Click here

4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Remove the rear door opening trim weatherstrip.

Installation

INSTALLATION

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Align the paint mark on the rear door opening trim weatherstrip with the position mark on the vehicle, then install the rear door opening trim weatherstrip as shown in the illustration.

Paint Mark:

Location

Color

Left side

Brown

Right side

Light Blue

NOTICE:

  • Always align the paint mark with the flange when installing the part. If the paint mark is not aligned, water may enter.
  • After installation, check that the corners are fitted correctly.

HINT:

To install the weatherstrip easily, first prepare the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.

*a

Paint Mark

*b

Paint Mark Position

2. INSTALL REAR DOOR SILL PLATE (w/o Rear Seat Side Airbag)

Click here

3. INSTALL REAR DOOR SILL PLATE (w/ Rear Seat Side Airbag)

Click here

4. INSTALL REAR SEAT ASSEMBLY

Click here