Intrusion sensor (on models equipped with one)
The intrusion sensor detects intruders or movement inside the vehicle.
This system is designed to deter and prevent vehicle theft; it does not provide absolute protection against intrusion.
■ Arming the intrusion sensor The intrusion sensor arms automatically, at the same time as the alarm.
■ Disabling the intrusion sensor If you leave a pet or anything movable inside the vehicle, be sure to disable the intrusion sensor before arming the alarm, as it will react to any movement in the cabin.
1. Turn the ignition switch to "LOCK" (vehicles without a smart entry & start system) or to off (vehicles with a smart entry & start system).
2. Press the intrusion sensor cancel button.
A message is displayed on the multi-information display.
The intrusion sensor is reactivated each time you turn the ignition switch to "ON" (vehicles without a smart entry & start system) or to IGNITION ON mode (vehicles with a smart entry & start system).

■ Automatic disabling and reactivation of the intrusion sensor
- The alarm remains armed even if the intrusion sensor is disabled.
- Vehicles without a smart entry & start system: After disabling the intrusion sensor, turn the ignition switch to "LOCK" or unlock the doors with the remote control for the power door lock system to reactivate it.
Vehicles with a smart entry & start system: After disabling the intrusion sensor, press the ignition switch or unlock the doors with the smart entry function or the remote control for the power door lock system to reactivate it.
- The intrusion sensor is automatically reactivated when the alarm is deactivated.
■ Detection considerations for the intrusion sensor The sensor may trigger the alarm in the following situations:
- People or pets are inside the vehicle.

- A side window is open.
In such cases, the sensor may detect the following movements:
- Wind, movement of objects such as leaves, or insects inside the vehicle
- Ultrasonic waves emitted by certain devices, such as the intrusion sensors of other vehicles
- Movement of people outside the vehicle

- Loose objects present (such as pendant-type accessories hanging from the grab handles inside the vehicle).

- Parking the vehicle in a location subject to strong vibrations or noise, such as a parking garage.

- Removing frost or snow from the vehicle, causing repeated impacts or vibrations.

- Washing the vehicle in an automatic or high-pressure car wash.
- Exposing the vehicle to repeated shocks or vibrations of any kind, such as hail, lightning, etc.
■ To ensure the intrusion sensor operates correctly
- To ensure the sensors operate correctly, avoid touching or covering them.

- Do not spray air fresheners or other products directly into the sensor openings.

Detection performance may be reduced by installing accessories that are not genuine Toyota parts, or by leaving objects between the driver's seat and the front passenger seat.
Anti-theft labels
These labels are affixed to the vehicle to reduce the risk of theft, as they make it easier to trace and recover parts from stolen vehicles. Do not remove them, as this may result in prosecution.
