Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the right and left sides.
- The procedure described below applies to the left side.
PROCEDURE
1. REMOVE REAR BENCH SEAT ASSEMBLY
Click here![]()
2. REMOVE REAR SEAT CUSHION LOCK HOOK
Click here![]()
3. REMOVE FRONT DOOR SCUFF PLATE
Click here![]()
4. REMOVE REAR DOOR SCUFF PLATE (with rear seat side airbag)
Click here![]()
5. REMOVE REAR DOOR SCUFF PLATE (without rear seat side airbag)
Click here![]()
6. REMOVE SEAT BELT OUTER LAP ANCHOR COVER
Click here![]()
7. DISCONNECT FRONT SEAT BELT OUTER BELT ASSEMBLY
Click here![]()
8. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
(a) Disconnect the front door opening trim weatherstrip from the area shown in the illustration. |
![]() |
9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
(a) Disconnect the rear door opening trim weatherstrip from the area shown in the illustration. |
![]() |
10. REMOVE CENTER PILLAR LOWER GARNISH
Click here![]()
11. REMOVE FRONT DOOR SILL LIGHT SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Using a TORX socket wrench T30, remove the bolt and the rear door sill light switch assembly.
![]() |
Remove in this direction |


.png)