Door Lock

Removal

~2min read

REMOVAL

PRECAUTION / NOTICE / HINT

NOTICE:

Handle these high-precision electronic components with the greatest care.

PROCEDURE

1. REMOVE TRANSMITTER HOUSING COVER

(a) Using a screwdriver whose tip is wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

*a

Protective tape

Remove in this direction

NOTICE:

Do not apply excessive force when removing the transmitter housing cover.

2. REMOVE DOOR CONTROL TRANSMITTER TRIM

(a) Using a screwdriver whose tip is wrapped in protective tape, remove the door control transmitter trim as shown in the illustration.

*a

Protective tape

Remove in this direction

3. REMOVE TRANSMITTER BATTERY

(a) Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

*a

Protective tape

Remove in this direction

NOTICE:

  • Do not press the terminals with your finger.
  • Do not force the transmitter battery out, as the terminals may be damaged.
  • Do not touch the transmitter battery with wet hands. Moisture may cause corrosion.
  • Do not touch or move the components inside the transmitter. Otherwise, it may no longer function properly.
  • When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic transmitter.