Adjustment
ADJUSTMENT
PROCEDURE
1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT
(a) Remove No. 1 air duct.
Click here![]()
(b) Check the brake pedal height.
NOTICE:
- Inspect and adjust the brake pedal height with the floor carpet folded back.
- During measurement, make sure the measuring tool contacts the surface of the instrument panel insulator clip.
(1) Measure the shortest distance between the surface of the brake pedal pad and the instrument panel insulator clip.
*1 |
Brake Pedal Pad |
*2 |
Instrument Panel Insulator Clip |
*a |
Brake Pedal Height |
- |
- |
Brake pedal height from instrument panel insulator clip:
176.0 to 188.0 mm (6.93 to 7.40 in.)
If the pedal height is not as specified, adjust the brake pedal height using the procedure described below.
(c) Adjust the brake pedal height.
(1) Remove the stop light switch assembly. Click here |
|
(2) Loosen the clevis lock nut.
(3) Adjust the brake pedal height by turning the push rod.
Brake pedal height from instrument panel insulator clip:
176.0 to 188.0 mm (6.93 to 7.40 in.)
(4) Tighten the clevis lock nut.
Torque:
22 N·m {224 kgf·cm, 16 ft·lbf}
(5) Install the stop light switch assembly.
Click here![]()
(d) Install the No. 1 air duct.
Click here![]()
2. INSPECT BRAKE PEDAL FREE PLAY
(a) Depress the brake pedal until a slight resistance is felt. Measure the brake pedal free play as shown in the illustration. Brake Pedal Free Play: 1.0 to 6.0 mm (0.0394 to 0.236 in.) If the pedal free play is not as specified, inspect the stop light switch play. Click here If the pedal free play is as specified, proceed to the brake pedal reserve travel inspection procedure. |
|
3. INSPECT BRAKE PEDAL RESERVE TRAVEL
(a) With the engine running, depress the brake pedal and measure the brake pedal reserve travel.
*1 |
Brake Pedal Pad |
- |
- |
*a |
Brake Pedal Reserve Travel |
*b |
Floor Panel |
*c |
30 mm (1.18 in.) |
*d |
Extension Pipe from Floor Panel Surface |
Brake pedal reserve travel from extension pipe from floor panel surface at 300 N (31 kgf, 67.4 lbf):
115.0 mm (4.53 in.) minimum
If the travel is not as specified, troubleshoot the brake system.
Click here
![]()

