Audio / Video

Installation

~3min read
0102030405010.58N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL RADIO TUNER CAPACITOR

(a) Engage the claw to install a new terminal cover to the wire harness.

NOTICE:

  • Be sure to hold the crimped side of the terminal when installing the wire harness to the terminal cover.
  • Be careful not to bend the exposed wire when installing the wire harness to the terminal cover.
  • Do not apply excessive force when inserting the wire harness into the terminal cover.
  • If the terminal cover is deformed during installation, replace the terminal and terminal cover with new ones.

(b) Engage the 6 claws to install the 2 new terminal covers with wire harness to the radio tuner capacitor.

NOTICE:

  • Do not apply excessive force when inserting the terminal cover into the capacitor.
  • If the terminal cover is deformed during installation, replace the terminal, terminal covers and radio tuner capacitor with new ones.

(c) Insert the cover as shown in the illustration and engage the claw.

(d) Engage the clip to temporarily install the radio tuner capacitor with wire harness.

*A

for type A

*B

for type B

*C

for type C

(e) Install the radio tuner capacitor with the bolt.

Torque:

for type A:

10.5 N·m {107 kgf·cm, 8 ft·lbf}

for type B:

10 N·m {102 kgf·cm, 7 ft·lbf}

for type C:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL LH LUGGAGE COMPARTMENT SIDE TRIM PANEL ASSEMBLY

Click here

3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

Click here

4. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

Click here

5. INSTALL LH REAR SEAT SIDE GARNISH (without Rear Seat Side Airbag)

Click here

6. INSTALL LH REAR SEAT SIDE GARNISH (with Rear Seat Side Airbag)

Click here

7. INSTALL LH REAR PILLAR GARNISH (with Rear Seat Side Airbag)

Click here

8. INSTALL LH REAR SEAT BACK HINGE SUBASSEMBLY

Click here

9. CONNECT LH REAR DOOR OPENING TRIM WEATHERSTRIP

Click here

10. INSTALL LH REAR DOOR SCUFF PLATE (without Rear Seat Side Airbag)

Click here

11. INSTALL LH REAR DOOR SCUFF PLATE (with Rear Seat Side Airbag)

Click here

12. INSTALL REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

Click here

13. INSTALL LH LUGGAGE COMPARTMENT FLOOR BOX

Click here

14. INSTALL RH LUGGAGE COMPARTMENT FLOOR BOX

Click here

15. INSTALL SPARE WHEEL BED

Click here

16. INSTALL LUGGAGE COMPARTMENT BOARD ASSEMBLY

Click here

17. INSTALL BODY SIDE TRIM ASSEMBLY (with Body Side Trim)

Click here

18. INSTALL REAR PARCEL SHELF TRIM PANEL ASSEMBLY (with Rear Parcel Shelf Trim)

Click here