Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
- The front speed sensor rotor is an integral part of the front axle hub sub-assembly. If the front speed sensor rotor malfunctions, replace the front axle hub sub-assembly.
PROCEDURE
1. INSTALL FRONT SPEED SENSOR
(a) Install the front speed sensor to the steering knuckle with the bolt.
Torque:
8.5 N·m {87 kgf·cm, 75 in·lbf}
NOTICE:
- Keep the front speed sensor electrode and installation hole free of foreign matter.
- Fully insert the front speed sensor body into the steering knuckle before tightening the bolt.
- After installing the front speed sensor to the steering knuckle, make sure there is no gap between the front speed sensor bracket and the steering knuckle. Also make sure that no parts are caught by foreign matter.
(b) Engage the clamp to the front shock absorber assembly. NOTICE: Do not twist the front speed sensor wire harness when installing it. |
|
(c) Engage the 2 hooks of the front speed sensor bracket to the front shock absorber assembly.
NOTICE:
Do not twist the front speed sensor wire harness when installing it.
(d) Install the front hose to the front shock absorber assembly with the bolt. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} |
![]() |
(e) Install the 2 front speed sensor brackets with the 2 bolts.
Torque:
8.5 N·m {87 kgf·cm, 75 in·lbf}
NOTICE:
Do not twist the front speed sensor wire harness when installing it.
(f) Engage the clamp to the body.
NOTICE:
Do not twist the front speed sensor wire harness when installing it.
(g) Engage the clamp to the body.
NOTICE:
Do not twist the front speed sensor wire harness when installing it.
(h) Connect the connector.
(i) Return the front fender apron to its original position.
2. INSTALL FRONT FENDER APRON
(a) Install the front fender apron with the 3 clips.
(b) Install the 4 screws.
3. INSTALL ROCKER PANEL MOULDING
Click here![]()
4. INSTALL FRONT WHEEL
Click here
![]()
5. CHECK SPEED SENSOR SIGNAL
Click here
![]()

