Meters / Gauges / Display
Installation
In this manual: Meters / Gauges / Display
~1min read
INSTALLATION
PROCEDURE
1. INSTALL COMBINATION METER ASSEMBLY
(a) Connect the 2 connectors to install the combination meter assembly.
(b) Engage the guides and clips. |
![]() |
(c) Install the 2 screws.
2. INSTALL INSTRUMENT PANEL FINISH SUB-ASSEMBLY NO. 2
Click here
![]()
3. INSTALL COMBINATION METER FINISH PANEL ASSEMBLY
Click here
![]()
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
Click here
![]()
5. INSTALL COMBINATION METER FINISH PANEL SUB-ASSEMBLY
Click here
![]()
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click here![]()
NOTICE:
When the cable has been disconnected, some systems must be reset after the cable is reconnected.
Click here
![]()
Was this page helpful?
.png)