Interior Light

Installation

~1min read
010203040507.56N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

HINT:

Make sure to remove the cable before installing a new back door lock assembly.

(a) Apply MP grease to the sliding parts of the back door lock assembly.

(b) Install the back door lock assembly using the 3 bolts.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

(c) Connect the connector.

2. INSTALL BACK DOOR LOCK COVER

Click here

3. INSTALL BACK DOOR GARNISH PANEL ASSEMBLY

Click here

4. INSTALL LEFT BACK DOOR GARNISH SIDE

Click here

5. INSTALL RIGHT BACK DOOR GARNISH SIDE

HINT:

Perform the same procedure as for the left side.

6. INSTALL UPPER BACK DOOR GARNISH PANEL ASSEMBLY

Click here

7. INSTALL SILL GARNISH ASSEMBLY (with sill garnish)

Click here

8. INSTALL BACK PANEL GARNISH ASSEMBLY (with back panel garnish)

Click here