Interior Light

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT BACK DOOR LOCK ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) shown in the table below.

Standard resistance:

Tester Connection

Condition

Specified Condition

2 (ACT-) - 3 (D+)

Unlock

Below 1 Ω

2 (ACT-) - 3 (D+)

Lock

10 kΩ minimum

If the result is not as specified, replace the back door lock assembly.

*a

Component without wire harness connected

(back door lock assembly)

*b

Lock

*c

Unlock