Door Lock
Installation
In this manual: Door Lock
~1min read
INSTALLATION
PRECAUTION / NOTICE / HINT
NOTICE:
Handle these high-precision electronic components with the greatest care.
PROCEDURE
1. INSTALL TRANSMITTER BATTERY
(a) Install a new transmitter battery with the positive (+) side facing up, as shown in the illustration.
NOTICE:
- Do not bend the transmitter battery electrode during installation.
- Keep the transmitter housing cover free of dust and oil.
- When replacing the transmitter battery, before starting work, discharge static electricity built up in the body by touching the vehicle, for example, to avoid damaging the electronic key transmitter subassembly.
![]() |
Install in this direction |
(b) Install the transmitter housing cover by pressing it on as shown in the illustration.
![]() |
Install in this direction |
(c) Insert the mechanical key into the transmitter, as shown in the illustration.
![]() |
Install in this direction |
(d) Press one of the transmitter switches and check that the LED lights up.
OK:
The transmitter LED lights up when a switch is pressed.
Was this page helpful?
.png)