Seat Belt

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD, SEPARATE TYPE)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) shown in the table below.

Standard resistance:

Tester Connection

Condition

Specified Condition

1 - 3

Front passenger seat occupied

Less than 100 Ω

1 - 3

Front passenger seat unoccupied

1 MΩ or higher

If the results do not meet the specifications, replace the occupant detection sensor (front seat cushion pad, separate type).

*a

Component without wire harness connected

(Occupant Detection Sensor (Front Seat Cushion Pad, Separate Type))