Seats

Inspection

~2min read

INSPECTION

PROCEDURE

1. INSPECT LH FRONT SEAT CUSHION HEATER ASSEMBLY

(a) Made by TMC:

(1) Check the resistance.

  1. Measure the resistance according to the value(s) specified in the table below.

    Standard resistance:

    Tester Connection

    Condition

    Specified Condition

    A-4 - A-5

    Seat heater temperature of 20 °C

    2.36 to 2.42 kΩ

    B-1 - B-2

    4,46 à 5,34 Ω

    A-2 - A-6 - B-2

    Always

    Below 1 Ω

    If the result is not as specified, replace the LH front seat cushion heater assembly.

*a

Component without wire harness connected

(LH front seat cushion heater assembly)

(b) Made by TMMT:

(1) Check the resistance.

  1. Measure the resistance according to the value(s) specified in the table below.

    Standard resistance:

    Tester Connection

    Condition

    Specified Condition

    A-4 - A-5

    Seat heater temperature of 25 °C

    4.93 to 5.07 kΩ

    B-1 - B-2

    Seat heater temperature of 20 °C

    2,99 à 3,59 Ω

    A-2 - A-6 - B-2

    Always

    Below 1 Ω

    If the result is not as specified, replace the LH front seat cushion heater assembly.

*a

Component without wire harness connected

(LH front seat cushion heater assembly)

2. INSPECT RH FRONT SEAT CUSHION HEATER ASSEMBLY

(a) Made by TMC:

(1) Check the resistance.

  1. Measure the resistance according to the value(s) specified in the table below.

    Standard resistance:

    Tester Connection

    Condition

    Specified Condition

    A-4 - A-5

    Seat heater temperature of 20 °C

    2.36 to 2.42 kΩ

    B-1 - B-2

    4,46 à 5,34 Ω

    A-2 - A-6 - B-2

    Always

    Below 1 Ω

    If the result is not as specified, replace the RH front seat cushion heater assembly.

*a

Component without wire harness connected

(RH front seat cushion heater assembly)

(b) Made by TMMT:

(1) Check the resistance.

  1. Measure the resistance according to the value(s) specified in the table below.

    Standard resistance:

    Tester Connection

    Condition

    Specified Condition

    A-4 - A-5

    Seat heater temperature of 25 °C

    4.93 to 5.07 kΩ

    B-1 - B-2

    Seat heater temperature of 20 °C

    2,99 à 3,59 Ω

    A-2 - A-6 - B-2

    Always

    Below 1 Ω

    If the result is not as specified, replace the RH front seat cushion heater assembly.

*a

Component without wire harness connected

(RH front seat cushion heater assembly)