Inspection
INSPECTION
PROCEDURE
1. INSPECT SPIRAL CABLE ASSEMBLY
NOTICE:
- Do not remove the steering angle sensor from the spiral cable assembly when inspecting the spiral cable assembly.
- Remove the steering angle sensor from the spiral cable assembly only when replacing the spiral cable assembly.
(a) Visually check the spiral cable assembly for any defects.
(1) Defects include:
- Scratches
- Small cracks
- Dents
- Chips
- Cracks or other damage to the connector
OK:
There are no defects.
If any of these defects are found, replace the spiral cable assembly with a new one.
(b) Inspect the spiral cable sub-assembly.
*A |
without steering wheel heater |
*B |
with steering wheel heater |
*a |
Component without wire harness connected (Spiral Cable Assembly) |
*b |
Color: Light green |
*c |
Color: Black |
- |
- |
![]() |
Interlock |
- |
- |
NOTICE:
- When turning the spiral cable assembly, be sure to press the interlock as shown in the illustration to release the interlock mechanism.
- If the spiral cable assembly may break, do not turn it beyond the specified value.
(1) Set the spiral cable assembly to the neutral position.
- without steering wheel heater:
Click here
.gif)
- with steering wheel heater:
Click here
.gif)
(2) Measure the resistance between the spiral cable assembly terminals according to the value(s) specified in the table below.
Standard resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
F29-1 (CCS) - z4-3 (CCS) |
Always |
3 Ω max. |
F29-2 (ECC) - z1-7 (ECC) |
Always |
3 Ω max. |
F29-2 (ECC) - z4-4 (ECC) |
Always |
3 Ω max. |
F29-3 (EAU) - z1-8 (EAU) |
Always |
3 Ω max. |
F29-5 (AU2) - z1-10 (AU2) |
Always |
3 Ω max. |
F29-6 (AU1) - z1-11 (AU1) |
Always |
3 Ω max. |
F29-9 (HO) - z1-1 (HO) |
Always |
3 Ω max. |
F29-10 (+DP) - z1-2 (+DP) |
Always |
3 Ω max. |
F29-11 (+DP2) - z1-3 (+DP2) |
Always |
3 Ω max. |
F29-12 (DIST) - z1-4 (DIST) |
Always |
3 Ω max. |
F29-13 (IL+2) - z1-5 (IL+2) |
Always |
3 Ω max. |
F29-14 (IL-2) - z1-6 (IL-2) |
Always |
3 Ω max. |
F20-2 (EHT) - z6-3 (EHT)*1 |
Always |
3 Ω max. |
F20-4 (BHT) - z6-4 (BHT)*1 |
Always |
3 Ω max. |
F30-1 (D+) - z2-2 (D+) |
Always |
Below 1 Ω |
F30-2 (D-) - z2-1 (D-) |
Always |
Below 1 Ω |
F30-3 (D2-) - z15-1 (D2-)*2 |
Always |
Below 1 Ω |
F30-4 (D2+) - z15-2 (D2+)*2 |
Always |
Below 1 Ω |
- *1: with steering wheel heater
- *2: for double type
(3) With the spiral cable assembly set to the neutral position, turn the spiral cable assembly 2.5 turns clockwise and measure the resistance according to the value(s) specified in the table below. Then, turn the spiral cable assembly 5 times counterclockwise and measure the resistance according to the value(s) specified in the table below.
Standard resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
F29-1 (CCS) - z4-3 (CCS) |
Always |
3 Ω max. |
F29-2 (ECC) - z1-7 (ECC) |
Always |
3 Ω max. |
F29-2 (ECC) - z4-4 (ECC) |
Always |
3 Ω max. |
F29-3 (EAU) - z1-8 (EAU) |
Always |
3 Ω max. |
F29-5 (AU2) - z1-10 (AU2) |
Always |
3 Ω max. |
F29-6 (AU1) - z1-11 (AU1) |
Always |
3 Ω max. |
F29-9 (HO) - z1-1 (HO) |
Always |
3 Ω max. |
F29-10 (+DP) - z1-2 (+DP) |
Always |
3 Ω max. |
F29-11 (+DP2) - z1-3 (+DP2) |
Always |
3 Ω max. |
F29-12 (DIST) - z1-4 (DIST) |
Always |
3 Ω max. |
F29-13 (IL+2) - z1-5 (IL+2) |
Always |
3 Ω max. |
F29-14 (IL-2) - z1-6 (IL-2) |
Always |
3 Ω max. |
F20-2 (EHT) - A-3 (EHT)*1 |
Always |
3 Ω max. |
F20-4 (BHT) - A-4 (BHT)*1 |
Always |
3 Ω max. |
F30-1 (D+) - z2-2 (D+) |
Always |
Below 1 Ω |
F30-2 (D-) - z2-1 (D-) |
Always |
Below 1 Ω |
F30-3 (D2-) - z15-1 (D2-)*2 |
Always |
Below 1 Ω |
F30-4 (D2+) - z15-2 (D2+)*2 |
Always |
Below 1 Ω |
- *1: with steering wheel heater
- *2: for double type
(4) With the spiral cable assembly set to the neutral position, turn it 2.5 times clockwise. Then, turn the spiral cable assembly 5 times counterclockwise and measure the resistance according to the value(s) specified in the table below.
Standard resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
F29-1 (CCS) - z4-3 (CCS) |
Always |
3 Ω max. |
F29-2 (ECC) - z1-7 (ECC) |
Always |
3 Ω max. |
F29-2 (ECC) - z4-4 (ECC) |
Always |
3 Ω max. |
F29-3 (EAU) - z1-8 (EAU) |
Always |
3 Ω max. |
F29-5 (AU2) - z1-10 (AU2) |
Always |
3 Ω max. |
F29-6 (AU1) - z1-11 (AU1) |
Always |
3 Ω max. |
F29-9 (HO) - z1-1 (HO) |
Always |
3 Ω max. |
F29-10 (+DP) - z1-2 (+DP) |
Always |
3 Ω max. |
F29-11 (+DP2) - z1-3 (+DP2) |
Always |
3 Ω max. |
F29-12 (DIST) - z1-4 (DIST) |
Always |
3 Ω max. |
F29-13 (IL+2) - z1-5 (IL+2) |
Always |
3 Ω max. |
F29-14 (IL-2) - z1-6 (IL-2) |
Always |
3 Ω max. |
F20-2 (EHT) - A-3 (EHT)*1 |
Always |
3 Ω max. |
F20-4 (BHT) - A-4 (BHT)*1 |
Always |
3 Ω max. |
F30-1 (D+) - z2-2 (D+) |
Always |
Below 1 Ω |
F30-2 (D-) - z2-1 (D-) |
Always |
Below 1 Ω |
F30-3 (D2-) - z15-1 (D2-)*2 |
Always |
Below 1 Ω |
F30-4 (D2+) - z15-2 (D2+)*2 |
Always |
Below 1 Ω |
- *1: with steering wheel heater
- *2: for double type
If the result does not meet the specification, replace the spiral cable assembly.
.png)