Inspection On Vehicle
INSPECTION ON VEHICLE
PRECAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures for the side airbag sensors.
PROCEDURE
1. INSPECT SIDE AIRBAG SENSOR (vehicle not involved in collision)
(a) Perform a diagnostic system check.
Click here![]()
2. INSPECT SIDE AIRBAG SENSOR (vehicle involved in collision without airbag deployment)
(a) Perform a diagnostic system check.
Click here![]()
(b) Visually check the side airbag sensors for any defects if a center pillar of the vehicle, or its surroundings, is damaged.
HINT:
Defects include the following:
- Cracks in the sensor housing
- Nicks in the sensor housing
- Chips in the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
OK:
There are no defects.
If any of these defects are found, replace the side airbag sensor with a new one.
3. INSPECT SIDE AIRBAG SENSOR (for vehicle involved in collision with airbag deployment)
(a) When the airbags have deployed following a collision, be sure to replace all side airbag sensors in the damaged areas (all those requiring repair).
(b) Visually check the side airbag sensors in the undamaged areas for any defects.
HINT:
Defects include the following:
- Cracks in the sensor housing
- Nicks in the sensor housing
- Chips in the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
OK:
There are no defects.
If a defect is found or if a side airbag sensor has detected a severe collision, replace the side airbag sensor with a new one.