Supplemental Restraint Systems
Inspection On Vehicle
In this manual: Supplemental Restraint Systems
~1min read
INSPECTION ON VEHICLE
PRECAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures for the seat position airbag sensor.
PROCEDURE
1. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle without Collision)
(a) Perform a diagnostic system check.
Click here![]()
2. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle with Collision)
(a) Perform a diagnostic system check.
Click here![]()
(b) Visually inspect the removed seat position airbag sensor assembly for defects.
HINT:
Defects include the following:
- Cracks in the sensor housing
- Nicks in the sensor housing
- Chips in the sensor housing
- Cracks or other damage to the connector
OK:
There are no defects.
If a defect is found, replace the rear seat position airbag sensor with a new one.
Was this page helpful?