Supplemental Restraint Systems
Inspection On Vehicle
In this manual: Supplemental Restraint Systems
~1min read
INSPECTION ON VEHICLE
PRECAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures for the occupant classification ECU.
PROCEDURE
1. INSPECT OCCUPANT CLASSIFICATION ECU (for vehicles not involved in a collision)
(a) Perform a diagnostic system check.
Click here![]()
2. INSPECT OCCUPANT CLASSIFICATION ECU (for vehicles involved in a collision)
(a) Perform a diagnostic system check.
Click here![]()
(b) Check the occupant classification ECU for any defects.
HINT:
Defects include the following:
- Cracks in ECU case
- Nicks in ECU case
- Chips in ECU case
- Cracks or other damage to the connector
- Damage to the serial number
OK:
There are no defects.
If any defects are found, replace the occupant classification ECU with a new one.
Was this page helpful?