Supplemental Restraint Systems

Inspection On Vehicle

~2min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures for the front seat cushion airbag assembly RH.

PROCEDURE

1. INSPECT FRONT SEAT CUSHION AIRBAG ASSEMBLY RH (for vehicles not involved in a collision)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the front seat cushion airbag sub-assembly RH installed in the vehicle for any defects.

HINT:

Defects include the following:

  • Scratches, tears or deformed threads on the front seat cushion surface near the front seat cushion airbag assembly RH
  • Small cuts in the front seat cushion around the front seat cushion airbag assembly RH
  • Significant discoloration of the front seat cushion around the front seat cushion airbag assembly RH

OK:

There are no defects.

If any defect is found, replace the separate-type front seat cushion pad or the separate-type front seat cushion cover with a new one.

2. INSPECT FRONT SEAT CUSHION AIRBAG ASSEMBLY RH (for vehicles involved in a collision but in which the airbag did not deploy)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the front seat cushion airbag assembly RH removed from the vehicle for any defects.

HINT:

Defects include the following:

  • Cuts
  • Small cracks
  • Significant discoloration
  • Drop Marks
  • Cracks or other damage to the wire harness or connector.
  • Deformation of the front seat cushion airbag assembly RH mounting surface

OK:

There are no defects.

If any defect is found, replace the front seat cushion airbag assembly RH with a new one.